• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 275 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90C402: Device Failure mode

Roland Melad
Intellectual 1185 points
Part Number: DS90C402

Hello Team,

My customer is requesting details below as they make their Failure Mode Effects and Criticality Analysis.

Regarding device DS90C402: 
1. On what particular conditions will the device fail? 
2. During failure, how will the device behave? Will it propagate any signal that can affect surrounding device? Will it affect any data/signal received or sent? 
3. Recommended schematic diagram or layout for this device. 

Can you help to provide information? Thanks


Regards,

Roland

  • 0
    TI__Genius 10250 points
    Hello Roland,

    1. The only data I have on this is the Abs Max Ratings in the datasheet. Exceeding those can lead to failures.
    2. During failure the behavior of the device cannot be guaranteed.
    3. I don't have schematics/layout for this device. However, the LVDS Owner's Manual has layout guidelines that are applicable for any LVDS device: www.ti.com/lit/ug/snla187/snla187.pdf .

    Regards,
    Yaser