4 channels Sub LVDS buffer (sub LVDS input, and Sub LVDS output)

Thomas Chang15933

Other Parts Discussed in Thread: DLPC3433, DLP3010

Dear TEam:

Our customer survey 4 channels Sub LVDS buffer (sub LVDS input, and Sub LVDS output), but I could not find it in our Web site.

Could you tell me which TI part number is '4 channels Sub LVDS buffer"?

over 4 years ago

0 Yaser Ibrahim over 4 years ago

TI__Genius 10250 points

Hello Thomas,

We do not have sub-LVDS buffers. However, if you can provide the specific characteristics of the sub-LVDS signal, I can try to see if we have a solution. Specifically, I need to know what the common mode range and differential signal at the input and at the output.

Regards,
Yaser

0 Yaser Ibrahim over 4 years ago in reply to Yaser Ibrahim

TI__Genius 10250 points

Hello Thomas,

Were you able to get the details? Or are they going a different route? Please let us know.

Regards,
Yaser

0 Thomas Chang15933 over 4 years ago in reply to Yaser Ibrahim

TI__Expert 4770 points

Dear Yaser:
Customer used our DLP solution that sub-lvds between your DLPC3433 and DLP3010.
The DLP datasheet is as below link.
www.ti.com/.../DLPC3433
www.ti.com/.../universalsearch.tsp

0 Yaser Ibrahim over 4 years ago in reply to Thomas Chang15933

TI__Genius 10250 points

Hi Thomas,

Thanks for providing the details. The LVDS buffers we have output LVDS signal with a common mode and differential voltages that can exceed the max specs for the sub-LVDS inputs of DLP3010. So they can't be used for this application.

Regards,
Yaser

Interface

Interface forum

Because of the Fourth of July holiday, TI E2E design support forum responses may be delayed from July 3 through July 4. Thank you for your patience.

4 channels Sub LVDS buffer (sub LVDS input, and Sub LVDS output)