• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987D: RCP design for ideal diode mode enabled

Ann_Lien
Genius 15770 points

Part Number: TPS65987D

Hi expert,

Customer is asking for TPS65987D RCP operation in ideal diode mode. I cannot find the operation in TRM. Could you kindly help to guide me how to enable ideal diode mode for RCP operation? Thanks a lot!!

Best regards,

Ann Lien

  • 0
    TI__Mastermind 36756 points
    Hi Ann,

    The TPS65987D will automatically set the RCP to either ideal diode mode or comparator mode based on the type of contract we are in (Source or Sink). This is not configurable by the user, it is set to the correct value automatically to ensure proper protection.

    Thank you,
    Eric