TUSB1044: I2C Through mode

Yusuke Mukuno

Part Number: TUSB1044

My customer has a question for TUSB1044 initial setting for I2C.

Customer want to control this device by I2C. Will I2C data lines become through mode without any initial setting(any hardware pins setting)?

If they need any pins control, please let me know.

Muk

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 177636 points

Yusuke-san

Would you please clarify your question? What does I2C through mode mean?

FLIP/SCL and CTL0/SDA are FLIP and CTL0 when in GPIO mode. When in I2C mode, they are SCL and SDA.

Thanks
David

0 Nasser Mohammadi over 6 years ago in reply to David (ASIC) Liu

TI__Guru* 93670 points

Greetings Yusuke-San,
It's been more than three days with no updates from your customer. I am assuming given David's response, it means this issue is resolved. Therefor we are closing this E2E case. Please re-open this case if there is a new update.
Regards,,nasser

Interface

Interface forum

TUSB1044: I2C Through mode