• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 393 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB940-Q1: How to configure the bit mapping when paired with DS90UB947-Q1

Dongbao Zhou
Expert 4180 points

Part Number: DS90UB940-Q1
Other Parts Discussed in Thread: DS90UB947-Q1,

Hello,

Do you know how to configure the bit mapping of ds90ub940-q1 when paired with ds90ub947-q1? OLDI mapping and SPWG mapping?

Thanks

Dongbao

  • 0
    TI__Guru** 103215 points
    Hello Dongbao,

    You don't need to configure bit mapping on 940 to pair with 947. On the 947 side, ensure the input mapping corresponds to the RGB output format of the source. No matter how the 947 is configured, it will properly map the RGB data to CSI-2 according to the mapping schemes in the 947 datasheet. So just make sure that you use the right mode so that your source is outputting the right RGB positions for the 947 mode.

    Best Regards,
    Casey