• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THVD1550: IC damage

Kai Hsiao
Guru 12675 points
Part Number: THVD1550

Hi Sir 

if the RS485 bus have 96pcs of device and one of RS485 IC is damage ("A pin or B pin short to GND" or "A pin short with B pin")

About others workable RS485 device ,does TI have solution can still keep the RS485 bus working ?

Thanks

  • 0
    TI__Mastermind 25705 points

    Kai,

    If one of the RS-485 node is physically damaged, I don't think there is a good way to keep communication work until you get rid of the bad IC. You can prevent this from happening by applying better protection (higher ESD level/fault voltage IC, or more robust external components). It is also a challenge to nail down the bad node fast on a multi-node bus.

    Regards,

    Hao