DP83869HM: Do you suggest the dp83869hm register setting in 1000M media converter and correction ?

PHILIP HSU

Expert 1900 points

Part Number: DP83869HM

Hi Sir,.

Do you suggest the dp83869hm register setting in 1000M media converter and correction ?

8712.CV4-S1-4111L.pdf

over 7 years ago

0 Aniruddha Khadye over 7 years ago

TI__Mastermind 18425 points

Hi Philip,

For 1000Mbps media convertor mode, you can use the following register settings,
0x01DF = 0x0044
0x1EC[0] = 0 (only bit [0] should be changed to '0'.)
0x0000 = 0x1140
0x0010 = 0x5048
0x0C00 = 0x1140

-Regards
Aniruddha

0 PHILIP HSU over 7 years ago in reply to Aniruddha Khadye

Expert 1900 points

Yes Aniruddha,.

thanks,

besides, we used the TPS73525 to supply VDDA2P5, but found it follows VDDIO 3V3 and affect to 2.8~2.9V even,

is it possible as schematics that was attached in "Three Supply Configuration" ?

could we check the "strap_aneg_en" register by hardware pin out?

thank you

Interface

Interface forum

DP83869HM: Do you suggest the dp83869hm register setting in 1000M media converter and correction ?