• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987D: Sink mode setting

David Park
Expert 7140 points

Part Number: TPS65987D

Hi,

Could you let me know if below requirements are available in sink mode?

When 5V~12V PD charger is attached, only 12V is accepted. not 5V, not 9V.

When non-PD charger is attached, sink is disabled.

Thanks.

  • 0
    TI__Mastermind 30000 points
    Hello David,

    If a PD source is attached that supports up to 12V, and you have the sink configured to be able to support sinking 12V, then the sink PD controller would request the highest voltage available which in this case would be 12V. You do not have to do anything special to enable this.

    May I ask why you would only want the port to be enabled when a PD supply has been connected?