• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65987DDJ: PPHV OCP and RCP Behavior and Response Time

Jim CHEN
Expert 4795 points
Part Number: TPS65987DDJ
Other Parts Discussed in Thread: TPS65987D

Dear Team,

About OCP, what is the response time when PD detects OCP and turn off the internal MOSFET?

About RCP, there are comparator protection mode for source and ideal diode protection mode for sink. 

How these two mode detect the reverse current and turn off the internal MOSFETT? 

And what is the response time for each mode?

Thank you.

Jim

  • 0
    TI__Mastermind 36756 points

    Hi Jim,

    The Power Path performance and protection app note highlights the different responses of the OCP. Keep in mind that there is both HW and FW OCP in the TPS65987D and they will be enabled based on the type of OCP event. (Hard short Vs. Soft Short). 

    For RCP, the TPS65987D FW automatically selects the RCP mode based on the power path events. There is no need to worry about configuring this as the FW handles it automatically.

    Thank you,
    Eric