TUSB9261: SATA compliance test setting

Vincent Chen64988

Part Number: TUSB9261

Hi Team,

My customer is using TUSB9261 and would like to do the SATA compliance test, could team help provide the testing procedure or an application note.

Thanks a lot.

Vincent Chen

over 6 years ago

0 Brian Zhou over 6 years ago

TI__Guru*** 146495 points

SATA_PHY_TSG_OOB_Agilent_MOI_v1_0_rev1_3.pdf

0 Vincent Chen64988 over 6 years ago in reply to Brian Zhou

TI__Expert 4480 points

Hi Brian,

Thanks a lot for sharing the materials.

My customer replied he didn't see the command of the test pattern for TUSB9261 in the document. I need SATA TEST PATTERN-- HFTP, MFTP, LFTP, LBP command like as below.

Do you have any comment on it?

Thanks a lot.

Vincent Chen

0 Vincent Chen64988 over 6 years ago in reply to Vincent Chen64988

TI__Expert 4480 points

Hi Team,

Any update for this issue.?

Thanks a lot.

Vincent Chen

0 Vincent Chen64988 over 6 years ago in reply to Vincent Chen64988

TI__Expert 4480 points

Hi Brian,

Is there any update for this issue, my customer is waiting for our advice.

Thanks a lot.

Vincent Chen

0 Brian Zhou over 6 years ago in reply to Vincent Chen64988

TI__Guru*** 146495 points

Vincent:

The TUSB9261's firmware provided by TI does not have any special support for SATA compliance test. Customer could put the TUSB9261 in BIST mode and send data patterns

0 Vincent Chen64988 over 6 years ago in reply to Brian Zhou

TI__Expert 4480 points

Hi Brian,

Thanks a lot, since there is no description about BIST mode in datasheet. Is there any application note that can guide my customer to set TUSB9261 into BIST mode?

Vincent Chen

0 Brian Zhou over 6 years ago in reply to Vincent Chen64988

TI__Guru*** 146495 points

yes, pls accept my friendship request and I will send BIST document to you.

Interface

Interface forum

TUSB9261: SATA compliance test setting