• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 307 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB936-Q1: DS90UB936-Q1 I2C configuration script(I2C configure example) needed

Jessica Wu74
Expert 6000 points
Part Number: DS90UB936-Q1
Other Parts Discussed in Thread: DS90UB933-Q1, , DS90UB935-Q1

Hi Team,

Could you please kindly help to confirm if we have DS90UB936-Q1 & DS90UB933-Q1  I2C relate configuration file(script file) to provide to customer to begin their software design. Customer want to use some configuration example to have a study firstly about our device, so we need some support from you to confirm if we do have relate material to provide to customer, thank you very much for your kindly support.

Best regards

Jessica

  • 0
    TI__Expert 3390 points

    Hi Jessica,

    There's no script in the datasheet for the two parts. If you're trying to ensure that you have communication, then you can read all the registers from the DS90UB935-Q1 via the Back channel of the DS90UB936-Q1. This would confirm that the communication is there. 

    Another option is to go to Table 8 in the DS90UB936-Q1 datasheet and configure one of the GPIOs as desired. You can configure the GPIOs to bring out the LOCK indication.

    Regards,
    Mandeep Singh

  • 0 in reply to Mandeep S
    TI__Expert 6000 points

    Hi Mandeep,

    Thank you very much for your kindly support.

    Best regards

    Jessica