DS90UB954-Q1EVM: need to hook DS90UB954-Q1EVM to my processor’s MIPI

Viktorija Cecil

Mastermind 18501 points

Part Number: DS90UB954-Q1EVM

Team,

What cable (part number) should my customer use to interface our EVM to his processor (NXP) Mipi?

Thanks

Viktorija

over 6 years ago

0 Casey McCrea over 6 years ago

TI__Guru** 103215 points

Hello Viktoija,

Most likely the customer would need to design their own interface board to route the signals from our EVM CSI-2 connector to their particular HW platform. There is no standard pinout.

Best Regards,

Casey

Interface

Interface forum

DS90UB954-Q1EVM: need to hook DS90UB954-Q1EVM to my processor’s MIPI