• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 254 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF410: DS250DF410 could not work normally

Eric Hsu34
Prodigy 310 points
Part Number: DS250DF410

Hi Team,

My DS250DF410  is not working normally while the system could operate normal when bypass DS250DF410.

ALL_DONE_N pin is moving from H to L.

Based on your experience, what are other possible way I could test to find out the bottleneck?

Will it might be FW issue?

thank you

  • 0
    TI__Guru* 93670 points

    Hi Eric,

    If I understand you correctly, you mean if you bypass DS250DF410 the system works normally but with DS250DF410 system works normally.

    1). Please let us know how you are bypassing DS250DF410 device?

    2). ALL_DONE_L signal is related to the EEPROM operation. Please let us know what you mean by system not working?

    3). Through email, please send us your schematic and the overall evaluation setup.

    Regards,,, Nasser