• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 245 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS100BR210: Timing Spec

Jim CHEN
Expert 4795 points
Part Number: DS100BR210

Dear Team,

Is there any timing spec requirement if my customer uses daisy-chain boot from I2C-ROM with six or more devices?

Is there another timing spec requirement for this device? I only saw LOS and ENABLE/DISABLE Timing & SMBus Timing requirements.

Thank you.

Jim

  • 0
    TI__Mastermind 43795 points

    Hi Jim,

    No timing spec.  Follow the diagram in the datasheet using the daisy chain between DONE# and READEN#  this sets up the proper timing between devices.

    I would recommend using sequential I2C addresses starting with 0xB0 if possible.  (0xB0, 0xB2, 0xB4, 0xB6, 0xB8, and 0xBA)

    Regards,

    Lee