• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB934-Q1: Frequency and Amplitude on coaxial cable

user4370495
Expert 1155 points
Part Number: DS90UB934-Q1

Dear TI :

My custom have two quentions about the frequency and amplitude on coaxial cable in ds90ub934-q1 . thanks very much.

1. The frequency of the video stream on the coaxial cable is related to which factors, and how to calculate?
2. On the coaxial cable, the voltage amplitude of the video signal and control signal is related to those factors and how to calculate.

  • 0
    TI__Guru** 103215 points

    Hello,

    Please refer to the serializer datasheet for information on the forward channel speed. For 934 it is based on the serializer which is used and the PCLK rate of the imager. See the 934 datasheet electrical tables for information on the back channel single-ended voltage amplitude and see the serializer datasheet for the forward channel driver single ended amplitude. 

    Best Regards,

    Casey