Hello There,
I am working on a design very similar to Tapex Creek using our internal Port Controller part number: CD3215
I would need to get access to the GUI and config. files for programming the SPI Flash on my board.
Thank you,
Shahram Farazi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello There,
I am working on a design very similar to Tapex Creek using our internal Port Controller part number: CD3215
I would need to get access to the GUI and config. files for programming the SPI Flash on my board.
Thank you,
Shahram Farazi
Hi Shahram,
You can request access by clicking on the "Request" button under the Special Note of the TPS65983B product page.
Thanks,
Eric
Hello Eric,
I did click on "Request" button before I leave for my vacation but not sure how to proceed with next step. I don't see any information mailed to me with regards to this request, please advice.
Thanks,
Shahram
Hi Shahram,
I just checked and it looks like you have access to the secure site now. I will close this thread.
Thank you,
Eric
Hi Eric,
Yes, I got the access information couple days ago. Thanks for your help.
Shahram