This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS100KR401: when we use Signcon Architect GUI to create EEPROM data after press the update slot from device the eeprom page eeprom data will still keep 0x00 , is it correct ?

Part Number: DS100KR401

when we press the update slot from device the major channel setting will change but the EEPROM data will still keep 0 which is different from the low level page setting . is it correct ? slot update detail will have slot0..8 which one we should slect?

  • Hi Josh,

    Within the EEPROM Header section on the left side of the page is a button for "Address Map Enabled".  With this function enabled, the EEPROM image creates address space for 16 devices.  This address space moves the EEPROM image data for DS100KR401 at address 0xB0 to start at 0x23.

    Regards,

    Lee