TUSB8041: programming tool for tusb8041

user1320317

Part Number: TUSB8041

Hi,

I'm designing a hub using the TUSB8041 hub and is currently programming the EEPROM for configuring the hub using a external EEPROM programmer. I have seen a programming tool mentioned in the forums multiple times. Is it possible to get access to this tool, and if available, example files for the EEPROM?

Thanks!

over 6 years ago

0 Malik Barton57 over 6 years ago

TI__Guru 64326 points

Hi,

We do have a EEPROM programmer. Please accept my friend request and post once accepted. I then can send you the software through E2E. We do not have example files for the firmware please defer to the datasheet for additional information on each register.

0 Malik Barton57 over 6 years ago in reply to Malik Barton57

TI__Guru 64326 points

Is there any more support needed for this issue? If so please reply with any relevant details so that I can further assist you. For now I will be marking this thread as "TI Thinks Resolved". If you have resolved your issue, please post the solution to the original problem/post for others with similar issues.

0 user1320317 over 6 years ago in reply to Malik Barton57

Prodigy 25 points

I had finded something useful by myself,thanks for your reply.

0 Malik Barton57 over 6 years ago in reply to user1320317

TI__Guru 64326 points

Understood, closing ticket,

Interface

Interface forum

TUSB8041: programming tool for tusb8041