TUSB3410: 2 quick question for TUSB3410 schematic application design

George Liu1

Part Number: TUSB3410

Hi sir,

We got 2 quick question for TUSB3410 application from customer, need your help to re-confirm it.

1. The D1 between SUSPEND &VREGEN pin, would it necessary to placement?

2. For SCL/SDA, 8 pin ROM socket necessary to use? Customer need to reserves it?

Thanks,

George

0 David (ASIC) Liu over 5 years ago

George

1. Please see section 6.6 of the TUSB3410 datasheet.

2. it is not necessary to use a 8 pin ROM socket. You can connect EEPROM directly to the TUSB3410.

Thanks

David

0 George Liu1 over 5 years ago in reply to David (ASIC) Liu

Hi David,

Thanks for your update, if I need your support for the schematic review. Who should I send to?

Thanks,

George

0 David (ASIC) Liu over 5 years ago in reply to George Liu1

George

You can send the schematic to me for review.

Thanks
David

0 George Liu1 over 5 years ago in reply to David (ASIC) Liu

Thanks David, send you by email.

Interface forum