DS90CF384AQ-Q1: Color Mapping data

Charles Jeon

Expert 2975 points

Part Number: DS90CF384AQ-Q1
Other Parts Discussed in Thread: DS90CF386, DS90CF384

Hi team

Color mapping data of the DS90CF384-Q1 is not find in the datasheet.

Data sheet of the DS90CF386 was contain Color Mapping (Table 2 & Table 3).

Are the color mapping data of DS90CF384-Q1 and DS90CF386 the same?

If not, please share color mapping data for DS90CF384-Q1.

Thank you.

over 6 years ago

0 Ikechukwu Anyiam over 6 years ago

TI__Mastermind 35130 points

Hi Charles,

There is no defacto color mapping as the color mapping depends on your application. Please reference Figure 8 in the datasheet.

Each LVDS lane contains 7 bit positions, of which you can map any RGB bit you want. For example, if the LVDS bit stream position "TxIN7" in LVDS input channel "RxIN0" is mapped to R0, then R0 will be output on RxOUT0.

Regards,

I.K.

0 Charles Jeon over 6 years ago in reply to Ikechukwu Anyiam

Expert 2975 points

Dear. I.K.

Is the color mapping data of the DS90CF386 the same for the DS90CF384?

Thank you

0 Ikechukwu Anyiam over 6 years ago in reply to Charles Jeon

TI__Mastermind 35130 points

The tables in the DS90CF386 datasheet are just examples for the most common mapping schemes. As I mentioned previously, the color mapping depends on your application. The examples can be applied to the DS90CF384 if that is the mapping your system uses.

Regards,

I.K.

Interface

Interface forum

DS90CF384AQ-Q1: Color Mapping data