DS90UH948-Q1: Check how to connect to the panel

Patty Chuang

Part Number: DS90UH948-Q1

Hi,

Could you please help to check if DS90UH948-Q1 could connect to this panel(spec as below):

and also please advise how to connect them, thanks!

Panel spec: 1920RGB*720 resolution in RGB stripe dot arrangement/interfaces: 2port LVDS(8bit, VESA, DE mode)

over 5 years ago

0 Casey McCrea over 5 years ago

TI__Guru** 103215 points

Hello Patty,

Yes it can connect. The 948 has 8 data output pairs which can be matched up to the inputs of this panel. For 948, D0-D3 are the odd pixels and D4-D7 are the even pixels.

So connect

D0-D3 to RXOIN0-RXOIN3

D4-D7 to RXEIN0-RXEIN3

Also connect

CLK1 to RXOCLK

CLK2 to RXECLK

Best Regards,

Casey