• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 320 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF810: EOM parameter definition

Satoshi Yone
Expert 3600 points
Part Number: DS250DF810

Hi, Team,

Please allow me to ask the basic question. Could you please let me know the below definition and difference between the each parameter?

-Raw Data
-Error Hit Count
-Error Hit Density

Best Regards,
Satoshi Yone

  • 0
    TI__Mastermind 19235 points
    • Raw data -> Output mode were signal traverses the CTLE stage but the CDR is bypassed. Data in unretimed in this mode
    • Error hit count -> number of signal observations made by eye opening monitor function for a given phase-voltage point
    • Error hit density -> derivative function of EOM hit count

    Cordially,

    Rodrigo Natal