DS90UB960-Q1: Camera 4 to 1 Project issue

Andrew Liu74

Part Number: DS90UB960-Q1
Other Parts Discussed in Thread: DS90UB913Q-Q1, DS90UB913A-Q1

Camera 4 to 1 Project issue ,for 720p each camera .

1/ Could i use DS90UB913 Four pcs + DS90UB960 pare .in my project ?

2/ if DS90UB913 input single is RAW DATE, the DS90UB960 output is raw date ? raw date in CSI-2 ?

3/if DS90UB913 input single is RGB ,could i put ISP behind DS90UB960 ?

4/ Could i sent POWER throuth STP cable ?

5/ What is the DS90UB913 OUTPUT signal Frame ? 28bit or 14 bit ?

0 Mostafa Shuva over 6 years ago

Hello Andrew,

Yes.
In this case, the 913 input will be RAW. However, the CSI-2 output of the 960 will be RAW in packaged in a CSI-2 packet.
When you say behind do you mean: 913 -> 960 -> ISP? This is possible provided the ISP can accept CSI-2 as an input.
Yes, it is possible to send power through STP, though coax is more common.
The output frame is 28 bit.

0 Casey McCrea over 6 years ago in reply to Mostafa Shuva

Please also note that the serializer must be DS90UB913A-Q1, not DS90UB913Q-Q1.

Best Regards,

Casey

0 Andrew Liu74 over 6 years ago in reply to Casey McCrea

Dear Casey

thanks for your help ! could you provide the PPT/PDF of FPD-LINK training video in TI.COM web , I can not find the download file ! many thanks !

0 Casey McCrea over 6 years ago in reply to Andrew Liu74

Hello Andrew,

Unfortunately we can not provide the slides to the training videos. They must be viewed on TI.com

Best Regards,

Casey

Interface forum