TUSB1210: REF design for 1,8V logic

Lutz Naumann

Part Number: TUSB1210

Hello

I searching for a REF design showing the TUSB1210 used with 3,3V supply and 1,8V logic connections. The EVM seems to support it but I struggle to find the schematic. Could you please guide me to a document or REF Design.

thanks

Lutz

over 6 years ago

0 Brian Zhou over 6 years ago

TI__Guru*** 148140 points

you can look at TUSB1210 EVM user guide SLLU208 at Ti.com

0 Lutz Naumann over 6 years ago in reply to Brian Zhou

TI__Expert 6490 points

Thanks Brian,

this is what I was looking for. Unfortunately this document does not show in the product folder of the TUSB1210 EVM (at least not on my computer). Perhaps something needs fixing?

Lutz

0 Brian Zhou over 6 years ago in reply to Lutz Naumann

TI__Guru*** 148140 points

it's under technical document and user guide.

0 Lutz Naumann over 6 years ago in reply to Brian Zhou

TI__Expert 6490 points

"technical documents" is grayed out in this case and so one cannot reach the user guide. I'm using IE 11.

Lutz

0 Brian Zhou over 6 years ago in reply to Lutz Naumann

TI__Guru*** 148140 points

pls accept my friendship request, so I can send though private message.

Brian

Interface

Interface forum

TUSB1210: REF design for 1,8V logic