Hi team,
I have two questions.
1. SATA signal polarity should be matched with SN75LVCP600 Rx/Tx polarity?
e.g.
SATA + is connected to RX+
SATA - is connected to RX-
2. The datasheet mentions that the device should be placed within 6mil to RX.
If the distance is closer than 6mil, is this more helpful for the equalize function? or almost same performance even if the distance become closer than 6mil?
BTW, the unit of <6 " of figure 9 in the datasheet is mil, right?
Regards,
Noriyuki Takahash