• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 543 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF410: DS250DF410 and max24033 have error

boer.deng
Expert 1085 points
Part Number: DS250DF410

When doing 100G test equipment, DS250DF410 outputs no error code on macom scheme, but there is error code on max24033, no optimization can be done, may I ask whether there is any special setting on DS250DF410?

  • 0
    TI__Mastermind 19235 points

    Hi,

    I'm having difficulty visualizing the retimer test condition in question here and the specific issue being observed. Would you be able to provide a block diagram of your test setup and a more detailed description of the retimer test being performed and results being observed?

    Thanks,

    Rodrigo Natal

    HSSC Applications Engineer