DS90UH940-Q1: INTB_IN, should i pull high or low or left floating if no use ?

PYTsai

Genius 12330 points

Part Number: DS90UH940-Q1

INTB_IN, should i pull high or low or left floating if no use ?

0 Hamzeh Jaradat over 6 years ago

Hello Pytsai,

If this Pin is unused, tie to an external pulldown.

0 PYTsai over 6 years ago in reply to Hamzeh Jaradat

INTB_IN is an interrupt pin, if tie low will it propagate interrupt request to the serializer side ?

0 Hamzeh Jaradat over 6 years ago in reply to PYTsai

Hi,

It will not indicate an interrupt condition unless you activate that function on the registers. By default it is deactivated.

Interface forum