DP83640: 10M Ethernet waveform test environment question

AJ Cheng

Genius 3615 points

Part Number: DP83640
Other Parts Discussed in Thread: DP83630

Dear Sir.

We set up the test in the 10M Ethernet waveform test environment.

It was found that the DP83630 could not be tested, and no test waveforms were coming out.

Is there anything we should pay attention to in the 10M test (100M has been tested, OK). Thanks for help~

over 5 years ago

0 Vibhu Vanjari over 5 years ago

TI__Genius 11900 points

Hello AJ,

Please refer to the Appendix A of http://www.ti.com/lit/an/snla266/snla266.pdf. This is for a similar part and registers may be slightly different, however, the section outlines the steps required.

Thanks,

Vibhu

Interface

Interface forum

DP83640: 10M Ethernet waveform test environment question