DS90UB936-Q1: mode pin resister value

Shuji Ishiwata

Mastermind 8270 points

Part Number: DS90UB936-Q1

Hi Team,

I have a question ahout mode pin in DS90UB936-Q1.

Resistance values shown below.
Is it OK to change the resistance value to Rhigh = 10kΩ, RLow = 20kΩ?

Please let me know if you have any problems.

Best Regards,
Ishiwata

over 6 years ago

0 Mandeep S over 6 years ago

TI__Expert 3390 points

Hi Ishiwata,

Yes, that is okay. Just make sure you select resistors with 1% tolerance but other than that you are fine because you are well between the Vin and Vmax with those resistors.

Regards,
Mandeep Singh

0 Shuji Ishiwata over 6 years ago in reply to Mandeep S

Mastermind 8270 points

Hi Mandeep-san

Thank you very much. Thank you for your answer.

Best Regards,
Ishiwata

Interface

Interface forum

DS90UB936-Q1: mode pin resister value