• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 236 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS280MB810: EYE monitor function

Kuan Wei Chen (Kevin Chen)
Genius 9710 points

Part Number: DS280MB810

Dear Team,

We need to verify 25G signal on every segment of device.

Does DS280MB810 support the internal EYE monitor function ?

BR

Kevin

  • 0
    TI__Guru* 93570 points

    Hi Kevin,

    DS280MB810 does not support eye monitor function. It is a linear redriver with no retiming function to capture eye diagram. We have to rely on the receiving FPGA or ASIC to check eye quality.

    Please note, IBIS-AMI file for modeling of end application environment is available. Using this model, designer can plot expected eye diagram.

    Regards,, Nasser