DS90UB954-Q1: Connect STP on RXPORT1

NOBUO FUJIHARA

Genius 9335 points

Part Number: DS90UB954-Q1

Hi team,

My customer would like to connect DS90UB953 and DS90UB954 with STP cable on RXPORT1.

Customer tried by modifying existing coax connected board, but no lock status monitored at 954 side.

Attached is the summary of 954 register configuration, and monitored 954 status register.

Could you check if there are lack of settings for 954 to receive at RXPORT1 with STP cable?

Best regards,

Nobuo

E2E_ForSTP_Rxport1.xlsx

over 5 years ago

0 Casey McCrea over 5 years ago

TI__Guru** 103215 points

Hello Nobuo,

There is no register configuration needed to change between STP and Coax. How exactly was the coax board modified? Can you share the high speed connection?

Best Regards,

Casey

0 NOBUO FUJIHARA over 5 years ago in reply to Casey McCrea

TI__Genius 9335 points

Hi Casey,

Can we discuss over e-mail?

Best regards,

Nobuo

0 Casey McCrea over 5 years ago in reply to NOBUO FUJIHARA

TI__Guru** 103215 points

Hello Nobuo,

Sure, I will follow up with you there.

Thanks,

Casey

Interface

Interface forum

DS90UB954-Q1: Connect STP on RXPORT1