SN65DSI86: E-DP SI test for DSI86

kerr chang

Genius 4075 points

Part Number: SN65DSI86

Hi Team

How test e-DP signal for DSI86? Did we need Special setting for this test ?

We have use "DisplayPortApplet tools" to get e-dp for test. but DSI86 is mipi to e-DP.

How did we test e-dp signal?

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 186831 points

Kerr

You should able to test the eDP automatically, assuming using KeySight scope:

Or you have to use the I2C to manually write to SN65DSI86 following the prompt of the compliance test SW.

Thanks
David

0 kerr chang over 6 years ago in reply to David (ASIC) Liu

Genius 4075 points

Hi David

Did you have manually write to SN65DSI86 SOP ?

0 David (ASIC) Liu over 6 years ago in reply to kerr chang

TI__Guru**** 186831 points

Kerr

You have to use the I2C to manually write to SN65DSI86 following the prompt of the compliance test SW if automatically compliance testing is not being supported.

Thanks

David

Interface

Interface forum

SN65DSI86: E-DP SI test for DSI86