• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 244 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB964-Q1: Why need to set the minimum value for the rise time?

Sherry Liang
Genius 10255 points

Part Number: DS90UB964-Q1

Dear team,

Could you please tell me why do we need to set the minimum value for the rise time? Sometimes the customer can't meet the requirement, so they want to know why we set the minimum value.

Thanks & Best Regards,

Sherry

  • 0
    TI__Guru** 103215 points

    Hello Sherry,

    The minimum rise time is to ensure that all internal circuits have properly powered up during the boot sequence. If the ramp time is exceedingly fast, some analog circuits may not power up into the correct state so it is important to always follow the guidelines in this table. 

    Best Regards,
    Casey