TPS65988DJ: what is reasonable power consumption if sleep mode is entered?

user4760726

Part Number: TPS65988DJ

Hi team,

The power consumption for sleep mode in datasheet is 55uA (typecial). Is there a reasonable (maximum) value for sleep mode can be provided in worst case? Customer would like to know. please advised.

Best Regards,

Leroy Song

over 6 years ago

0 Eric Beljaars over 6 years ago

TI__Mastermind 36756 points

Hi Leroy,

The worst-case power consumption in sleep mode is dependent on the GPIO usage and circuitry connected on LDO_3V3. Since there are many options for these items, the maximum power consumption in sleep mode is not specified.

Thank you,
Eric

0 user4760726 over 6 years ago in reply to Eric Beljaars

TI__Intellectual 1235 points

Eric,

Thanks for your reply. Do you think we can add the maximum current that can be loaded for the LDO_3V3 and GPIO into account to have a data to share with customer? For example, the maximum ILDO_3V3_EX is 25mA, so it would be about 25.055mA (25mA +55uA) for the worst case? Any thought about it?

Best Regards,

Leroy Song

0 Eric Beljaars over 6 years ago in reply to user4760726

TI__Mastermind 36756 points

Hi Leroy,

That would be a reasonable assumption for the max current during sleep mode. However, you also need to take into account the current consumed by GPIOs during run-time so this value may fluctuate.

Thank you,
Eric

Interface

Interface forum

TPS65988DJ: what is reasonable power consumption if sleep mode is entered?