• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 312 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS250DF810: Data rate detected.

Joe DiBartolomeo
Expert 3115 points
Part Number: DS250DF810


All,

Customer would like to know if there is a register in the  DS250DF810 that will indicate the data rate  detected at input?

Thanks,

Regards,

Joe

 

  • 0
    TI__Mastermind 43795 points

    Hi Joe,

    The DS250DF810 channels can be programmed independently to detect different incoming datarates.

    The easiest way to do this is to use the Sigcon Architect GUI and program the expected input rate(s) into the Group 0 and Group 1 settings. 

    If the CDR is locked then the input datarate would be either of the settings for Group 0 - Group 1.

    Regards,

    Lee