SN65HVD72: SN65HVD72DR different bottom markings

Miranda J

Part Number: SN65HVD72

Hi,

My end user/customer brought up this question regarding bottom marking for part# SN65HVD72DR, DC 18+. There are 3 different types of bottom markings observed and wonder if it is typical for this part:

The curve tracing has been tested and shows consistency among samples while my end user has this bottom marking question waiting to be confirmed. Please help clarify.

Thanks,

over 5 years ago

0 Miguel Robertson over 5 years ago

TI__Guru 62920 points

Hello Miranda,

We have contacted our assembly site to help confirm whether these markings are expected. I will let you know once we hear back from them (I'd expect it this week).

Regards,
Max

0 Miranda J over 5 years ago in reply to Miguel Robertson

Intellectual 400 points

Hi Max,

Do you hear anything back from assembly side cuz my end user is still waiting for the feedback? Please let me know. Thanks.

0 Miguel Robertson over 5 years ago in reply to Miranda J

TI__Guru 62920 points

Hi Miranda,

Unfortunately not yet; I have just sent them a reminder.

Max

0 Miguel Robertson over 5 years ago in reply to Miguel Robertson

TI__Guru 62920 points

Hi Miranda,

I can now confirm that these are all normal bottom side markings for this device. Sorry it took some time. If you have any further questions please let me know.

Regards,
Max

Interface

Interface forum

SN65HVD72: SN65HVD72DR different bottom markings