SN65DSI83-Q1: DSI to RGB888 or YCBCR Bridge

Tomoaki Yoshida91

Genius 5255 points

Part Number: SN65DSI83-Q1
Other Parts Discussed in Thread: DS90UB941AS-Q1, DS90UB926Q-Q1

Hi team,

I am looking for a way to bridge from DSI to RGB888 or YCBCR.

I couldn't find it in Automotive products.

I found SN65DSI83-Q1 to bridge from DSI to LVDS because I thought it might be possible with multiple chips.

Is there a device to convert LVDS to RGB888 or YCBCR?

YCBCR is preferable if possible.

Best regards,

Tomoaki Yoshida

over 5 years ago

0 Ikechukwu Anyiam over 5 years ago

TI__Mastermind 35130 points

Hi Yoshida-san,

It would be better to use an FPD-Link solution with the DS90UB941AS-Q1 + DS90UB926Q-Q1 for your application. I'm moving this thread to the correct section if you have further questions about this solution.

Regards,

I.K.

0 Tomoaki Yoshida91 over 5 years ago in reply to Ikechukwu Anyiam

Genius 5255 points

Hi I.K.san,

Thank you for your reply.

I understand your suggestion.

I have one question.

Does this set support 480i from input to output?

Best regards,

Tomoaki Yoshida

0 Casey McCrea over 5 years ago in reply to Tomoaki Yoshida91

TI__Guru** 103215 points

Hello Tomoaki,

Yes, it should support standard 480i resolution. Just confirm that the pixel clock for the video is > 25MHz.

Best Regards,

Casey

0 Tomoaki Yoshida91 over 5 years ago in reply to Casey McCrea

Genius 5255 points

Hi Casey-san,

Thank you for your quick reply.

I understan it.

Best regards,

Tomoaki Yoshida

Interface

Interface forum

SN65DSI83-Q1: DSI to RGB888 or YCBCR Bridge