AM26C31: AM26C31CNS total supply current with specific condition

Masa,

I will get the power data for you. But I have a couple of questions first. 1) Are 9.5kHz and 4.5kHz the input data rate? 2) What's the capacitive load of each channel? Or cable type and cable length?

Regards,

Hao

Hi, Hao-san.

according to customer, it is difficult to articulate on those information.

the reason is that the output is brought to other board via connector with filter.

they don't use cable , the output signal to other board is connected with connector on PCB

the material of PCB is copper, its width : 1mm, distance is 15~20cm.

hope this helps you.

Masa-san,

Understood. I'll give you some data based on the estimate.

Regards,

Hao

hi, Hao-san.

may i get the time frame to know when we would be able to provide the feedback for customer?

Masa-san,

I'm so sorry I missed an important piece of information. Do the channels drive resistive load, like 120Ohm? They don't look so from your description, but I'd like to confirm. I'll provide the estimate as soon as I get your feedback.

Regards,

Hao

Hi, Hao-san.

ok, let me check