eMMC bus bridge

Hi Vincenzo,

Do you need 8 total data lanes and clock lanes you would like to switch?

What is the configuration you are looking for  - is it 2:1?

Can you also specify the voltage range of the signals -  I believe MMC supports 1.2 V - 3.3 V

How much data rate you need for your application? I believe eMMC supports up to 200Mbps.  We recommend switch bandwidth be 1.5 x the data rate.  For 200Mbps we would recommend a switch with 300MHz

You can use the TI.com switch selection tool and filter for these devices.  For example a 4-channel, 2:1, 1.8V, and >300 MHz bandwidth would return the TMUX1574. If you need an 8-channel solution with same configuration,  you can use 2 of these muxes.

regards,

Saminah

hi Saminah,

I see.

Unfortunately we need 10 lines (8-bit data + 1 clk + 1 cmd).

Is there any dedicated IC or a sinlge chip solution?

thanks a lot in advance

KR

Vincenzo