• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 619 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN75DP139: The IC SN75DP139 can be used in the J1900 baytrail platform?

kevin chang82
Prodigy 220 points
Part Number: SN75DP139
Other Parts Discussed in Thread: TDP158,

Hi sir,

We want to use the re-driver IC SN75DP139RSBR between CPU to HDMI connector.

Our schematic design is Baytrail J1900 platform and the inerface is Digital Display Interfaces (DDI).

The application of  SN75DP139RSBR can match our design???

If it's not, please recommand the other re-driver IC.

Thanks.

  • 0
    TI__Guru**** 178126 points

    Is the Digital Display Interface follow the DP or the DP++ standard?

    If the interface is DP, then it requires a DP to HDMI active protocol converter. Unfortunately, we do not have a active protocol converter solution.

    If the interface is DP++, then DP139 is the right solution. Please note the DP139 only supports HDMI1.4. If HDMI2.0 support is needed, then you have to use DP159.

    Thanks

    David

  • 0 in reply to David (ASIC) Liu
    Prodigy 220 points

    Hi sir,

    The TDP158 device is an AC-Coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals.

    The input of TDP158 can be DP++ TX or AC coupled HDMI TX.

    The input application of SN75DP139 is the same with the input of TDP158???

    Please help to confirm it.

    thanks 

  • 0 in reply to kevin chang82
    TI__Guru**** 178126 points

    DP139 is a AC-coupled HDMI1.4 level shifter re-driver.

    DP158 is a AC-coupled HDMI2.0 level shifter re-driver.

    DP159 is a AC-coupled HDMI2.0 level shifter re-timer/re-driver.

    Both DP139 and DP158 support AC-coupled HDMI, but at different data rate.

    Thanks

    David