ONET1151L: Inductive pull ups?

juan abelaira

Prodigy 150 points

Part Number: ONET1151L

According to the ONET1151L datasheet, AC coupling and "inductive pull ups" must be used.

Is there a suggestion or way to calculate those inductive pull ups?

over 6 years ago

0 Nasser Mohammadi over 6 years ago

TI__Guru* 93570 points

Hi Juan,

This depends on the TOSA that you would be using. It would be a good idea to discuss this with TOSA vendor as well. There could be some fine tuning in order to optimize optical eye diagram.

Regards,, Nasser

Interface

Interface forum

ONET1151L: Inductive pull ups?