• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 954 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB928Q-Q1: What is the push-pull parameter for GPIO output circuit?

Wilson Guo11
Prodigy 570 points
Part Number: DS90UB928Q-Q1


Hi Expert,

Could you please tell me the detail of GPIO output circuit. Is this a Push-pull? If so what is the resistor value of R1 and R2? Like below shows.

Best Regards,

Wilson

  • 0
    TI__Guru** 103215 points

    Hello Wilson,

    These are push/pull and the internal structure is not really a resistor. To find the characteristics of the GPIO you can refer to the DC electrical characteristics table. For example with 3.3VDDIO the characteristics are here: 

    You can derive "resistance" values based on the short circuit current. 

    Best Regards,

    Casey