DP83630: LINK-LED changing polarity

M.A.M

Part Number: DP83630

Hi team,

My customer is investigating why LED-LINK function seems to change polarity, although I do not see such a config register functionality, so I need your assistance to reveal the root cause.

- Can we take it offline please?

M.A.M

over 6 years ago

0 Cecilia Reyes over 6 years ago

TI__Genius 9920 points

Hello,

Perhaps it could be the I/O configuration of your LED_LINK. Have you referred to Section 10.2.5 of the LEDCR 'LED Direct Control Register'?

Thanks,

Cecilia

0 M.A.M over 6 years ago in reply to Cecilia Reyes

TI__Expert 8985 points

Cecilia,

Yes, we have looked at this register, but there it can just disable LED-LINK or set it to a fixed value. Customer claim polarity change so I believe that I need more in-depth support from you, including sending over sensitive info to you.

- Can I please have a contact to discuss further with directly?

Thanks.

B.r M.A.M

0 Cecilia Reyes over 6 years ago in reply to M.A.M

TI__Genius 9920 points

Hello,

Before we do a direct contact, does your customer believe it is changing polarity after the fact that they are setting it as either the intended input or output?

Thanks,

Cecilia

Interface

Interface forum

DP83630: LINK-LED changing polarity