MIPI-CSI2 Deserializer

Digesh Dave53

Prodigy 70 points

Other Parts Discussed in Thread: DS90UB960-Q1, DS90UB954-Q1, DS90UB964-Q1, DS90UB953-Q1

Please suggest part# and share datasheet link:

Technical spec. requirement:

Max frame size - 6144 x 6144.

- Min Frame size - 128 x 128.
- Multiple VCs
- Data Types - RAW10/RA W12/RAW8/RGB565.

- Max data rate - 2.5 Gbps.

over 6 years ago

0 Casey McCrea over 6 years ago

TI__Guru** 103215 points

Hello Digesh,

Do you mean max data rate = 2.5Gbps total or per lane? Also how many CSI-2 ports? What is the intended actual CSI-2 bandwidth required?

Best Regards,

Casey

0 Digesh Dave53 over 6 years ago in reply to Casey McCrea

Prodigy 70 points

Hi Casey,

Please find below inputs:

The MIPI CSI2 solution implements CSI2 v1.3 and D-PHY v1.2 specification.

Max. Data Rate = 2.5Gbps per lane

Number of CSI ports = 6 ports, each CSI port with 4 lanes

Intended bandwidth = 6144 x 6144 with 8 FPS for RGB565 and 6144x6144 with 16 FPS for RAW8, RAW10, RAW12 formats

Regards,

Digesh

0 Casey McCrea over 6 years ago in reply to Digesh Dave53

TI__Guru** 103215 points

Hello Digesh,

I'm attaching a calculator tool to help you with determining required CSI-2 bandwidths. For 6144x6144 @ 8 Hz, RGB565, total data rate should be ~6Gbps which is suitable for our DS90UB954-Q1 or DS90UB960-Q1 devices. However we do not have an available serailzer to carry this much raw CSI-2 bandwidth. This 6Gbps available bandwidth on our hub devices is used to aggregate multiple imager's data into one CSI-2 output.

This resolution with 16Hz, RAW12 would likely be above 6.4Gbps. You can use the calculator tool to check bandwidths and compare against available serializers.

4428.TI Imager-Serializer Data Rate Calculator v2.0 -- Non-NDA.xlsx

Best Regards,

Casey

0 Digesh Dave53 over 6 years ago in reply to Casey McCrea

Prodigy 70 points

Hi Casey,

Do help to share datasheet and more details on part # DS90UB972 ?

Thanks

0 Casey McCrea over 6 years ago in reply to Digesh Dave53

TI__Guru** 103215 points

Hello,

This is not a public ally released device. If you would like information on NDA TI components please contact your local TI sales representative.

Thanks,

Casey

0 Digesh Dave53 over 6 years ago in reply to Casey McCrea

Prodigy 70 points

Hi Casey,

Noted. thanks for your support.

0 Digesh Dave53 over 6 years ago in reply to Digesh Dave53

Prodigy 70 points

Hi Casey,

Would you mind sharing if there is any other TI part which supports greater than 6 Gbps payload rate where i can keep the resolution to 6144x6144 ?

Can i use DS90UB964-Q1, where i keep resolution to 6144x6144 and do data type RGB888, RAW12 at 5 Hz and/or 10 Hz respectively.

or can the above spec. be achieved using either of DS90UB954 or DS90UB960 only.

Thanks

0 Casey McCrea over 6 years ago in reply to Digesh Dave53

TI__Guru** 103215 points

Our highest speed publicly released serializer device is DS90UB953-Q1 which can support up to 3.3Gbps CSI-2 bandwidth. For NDA roadmap device discussions you will need to contact your local TI sales rep.

You should be able to use the calculator tool I provided to check these different configurations easily against the serializer available bandwidth.

Best Regards,

Casey

Interface

Interface forum

MIPI-CSI2 Deserializer