• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 34 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB954-Q1: GPIO pull down resistance(min-max) and GIPO state at power down

Takuma Ito
Expert 5200 points

Part Number: DS90UB954-Q1

Hello, can you tell me below? I want to know about 953 and 954. 

1. Min-Max pull down resistance of GPIO (typical is 35k for 954 and 300k for 953 but need tolerance). 

2. Are the GPIOs still pulled down at power down? or is it High-Z?