TPD6E05U06: error message when importing IBIS model of TPD6E05U06

Jacky Ng

Part Number: TPD6E05U06

I have encounter an error message :

"Error : at line 197 in file Z:/IBIS/TPD6E05U06.ibs : Repeated voltage value for typical curve"

When importing the IBIS model in simulation tool (Mentor Graphics HyperLynx)

over 5 years ago

0 Cameron Phillips over 5 years ago

TI__Genius 12410 points

Hello,

I believe this was an issue that there was a repeated line that had 0V. If you delete this line I believe the model will work.

0 Jacky Ng over 5 years ago in reply to Cameron Phillips

Prodigy 20 points

There are 2 lines that had 0V:
0.00 -1.77E-10 -1.41E-10 -2.12E-10
0.00 0.00E+00 0.00E+00 0.00E+00

which one should I delete?

0 Cameron Phillips over 5 years ago in reply to Jacky Ng

TI__Genius 12410 points

The all 0 one should be deleted.

Interface

Interface forum

TPD6E05U06: error message when importing IBIS model of TPD6E05U06