Step Models for RSE|10 Package

Art Mecina

Other Parts Discussed in Thread: SN65LVDS4

Hello Guys,

Good day. We noticed that we do not have step models for RSE|10 (UQFN 10pins) package.
is there a plan to create one in the near future?

Thanks to confirm!

Art

over 5 years ago

0 Jeffery Pfarr over 5 years ago

TI__Genius 14317 points

Hi Art,

Can you specify a TI part no. so that I can direct your question to a particular product group?

0 Jeffery Pfarr over 5 years ago in reply to Jeffery Pfarr

TI__Genius 14317 points

Hi Art,

I noticed that you posted previously and specified PN SN65LVDS4. I have directed this thread back to that product group to resolve. A member of our team will assist. Thanks for your patience.

0 Art Mecina over 5 years ago in reply to Jeffery Pfarr

TI__Genius 16655 points

Noted and thank you for looking into this Jeff !

Art

0 LeonardEllis over 5 years ago

TI__Guru 71526 points

Hi Art,

The .STP model is part of the ePOD process. There is not an ePOD for the 10RSE so we submitted a request today. The ePOD and .STP model should be available by end of next week, at which time it will be available on the Product Folder page.

Pin: 10

Package Designator: RSE

Package Group: uQFN

Date of Request: Thursday, March 05, 2020

At your service,

~Leonard

0 Art Mecina over 5 years ago in reply to LeonardEllis

TI__Genius 16655 points

Thanks Guys for the excellent support!

Art

0 LeonardEllis over 5 years ago in reply to Art Mecina

TI__Guru 71526 points

Hi Art,

FYI, STP file is now on the Product Folder page, ready for you to use!: https://www.ti.com/product/SN65LVDS4/toolssoftware .

~Leonard

0 Art Mecina over 5 years ago in reply to LeonardEllis

TI__Genius 16655 points

Thanks for following up on this Leonard!

Greatly appreciated!

Art

Interface

Interface forum

Step Models for RSE|10 Package