AM26LV31E: Unused pin

Michiaki Tanii

Expert 4610 points

Part Number: AM26LV31E
Other Parts Discussed in Thread: AM26LV32E

Hi team

Could you kindly advise how to deal with unused pin for AM26LV31E / AM26LV31E all channel was used.

Thank you and best regards,

Michiaki

over 5 years ago

0 Miguel Robertson over 5 years ago

TI__Guru 62920 points

Hello Tanii-san,

Unused G or A inputs should be pulled high or low so that they are at a known logic level. Unused Y or Z outputs can be left floating.

Regards,
Max

0 Michiaki Tanii over 5 years ago in reply to Miguel Robertson

TI__Expert 4610 points

Hi Max,

Regarding AM26LV32E, customer should pulled high or low for input pin (unused A, B and G) and can left floating for output pin (Y) as well AM26LV31E ?

Thank you and best regards,

Michiaki

0 Miguel Robertson over 5 years ago in reply to Michiaki Tanii

TI__Guru 62920 points

Tanii-san,

Yes, that is correct. It is also acceptable to leave A and B disconnected.

Regards,
Max

Interface

Interface forum

AM26LV31E: Unused pin