TUSB9261-Q1: About the descriptor's String

user5861762

Intellectual 370 points

Part Number: TUSB9261-Q1
Other Parts Discussed in Thread: TUSB9261

I have a question about the descriptor's String Descriptors. The default settings are as follows.

Manufacturer_String：Texas Instruments
Product_String：TUSB9261 USB3.0 to SATA Bridge
Serial_String：Automatic setting

Is it ok to change these setting values freely when installing them in our products?

For example, is it OK to set all 0 or FF?

Please let me know if you have any notes.

over 5 years ago

0 Malik Barton57 over 5 years ago

TI__Guru 64326 points

Hi,

Yes, these strings in the USB descriptors can be changed.

Please find the FlashBurner users guide at the link below and read the section 4.3 Editing USB Descriptors for additional details.

http://www.ti.com/lit/ug/sllu125d/sllu125d.pdf

0 user5861762 over 5 years ago in reply to Malik Barton57

Intellectual 370 points

Thank you for your answer.
I have one more question.

If we don't need strings values in our system, what is the best setting?
For example, set a blank or 0 using the flash banner.

0 Malik Barton57 over 5 years ago in reply to user5861762

TI__Guru 64326 points

Hi,

I believe it would be best to leave them as default.

Interface

Interface forum

TUSB9261-Q1: About the descriptor's String