HD3SS3220: How to clear the interrupt status

Kailyn Chen

Part Number: HD3SS3220

Hello,

How to clear the interrupt status? The register type of INTERRUPT _STATUS bit is R/U, read only, but the datasheet also describes as this:

Best regards

Kailyn

over 6 years ago

0 Malik Barton57 over 6 years ago

TI__Guru 64326 points

Hi Kailyn,

A write of 1'b1 is required to clear this field.

0 Kailyn Chen over 6 years ago in reply to Malik Barton57

TI__Genius 9560 points

Hi Malik，

Thank you very much for your reply.

Write 0 or 1 to clear the interrupt ? When the CSR has changed, the interrput pin pulled low, and this bit is 1, so we need to write 0 to clear it ,isn't it ?

Now the question is that our customer wrote 0 to clear it, but it has no effect.

Best regards

kailyn

0 Malik Barton57 over 6 years ago in reply to Kailyn Chen

TI__Guru 64326 points

Hi Kailyn,

No, customer should write a 1 (1'b1) to clear the interrupt.

Interface

Interface forum

HD3SS3220: How to clear the interrupt status